2021 Nashville AISTech

Sessions (323)

Artificial Intelligence and Data-Driven Modeling in Ironmaking – Potential and Limitations (Room Virtual)

28 Jun 21
7:30 AM - 8:00 AM

Investigation on Softening/Hardening Mechanisms Occurring During the Hot Rolling Process by Means of Advanced, Self-Training Virtual Smart Sensors (Room Virtual)

28 Jun 21
7:30 AM - 8:00 AM

IR Temperature Measurement to Monitor Induction Hardening Processes (Room Virtual)

28 Jun 21
8:00 AM - 8:30 AM

Data Driven Solutions and AI Simplifying Metals Complexity (Room Virtual)

28 Jun 21
8:30 AM - 9:00 AM

Extremely Rapid Ablation and In-Situ EBSD Preparation Using a Femtosecond Laser in the FIB-SEM (Room Virtual)

28 Jun 21
8:30 AM - 9:00 AM

Correlative Light, Electron and In-Situ Raman Imaging of Modern and Historic Railway Tracks, Linking Wear and Corrosion Behavior to Microstructure and Composition (Room Virtual)

28 Jun 21
9:00 AM - 9:30 AM

Mastering Fully Automated Steelmaking (Room Virtual)

28 Jun 21
9:00 AM - 9:30 AM

Shooter 4.0 – A Prototype for Intelligent and Autonomous Gunning Maintenance (Room Virtual)

28 Jun 21
9:30 AM - 10:30 AM

Wet Flash Cooling: A Flexible and High-Performance Quenching Technology for Gen3 AHSS (Room Virtual)

28 Jun 21
9:30 AM - 10:30 AM

Automatic Pilot For Strip Processing Lines (Room Virtual)

28 Jun 21
10:30 AM - 11:00 AM

Development and Successful Evaluation of an Atmosphere-Controlled Furnace for Direct Reduction Feedstock Studies (Room Virtual)

28 Jun 21
10:30 AM - 11:00 AM

Corrosion Behavior of Different Alloys in Zn and Al alloy Galvanizing Baths (Room Virtual)

28 Jun 21
11:00 AM - 11:30 AM

HIsarna: Benefits of an Innovative Smelting-Reduction Ironmaking Technology (Room Virtual)

28 Jun 21
11:00 AM - 11:30 AM

Cutting-Edge Process Technologies to Enhance Electrical Steel Performances (Room Virtual)

28 Jun 21
11:30 AM - 12:00 PM

Modernization of DRI Shaft Furnaces to Improve Performance and Product Quality (Room Virtual)

28 Jun 21
11:30 AM - 12:00 PM

Blast Furnace Data Validation Using Deep Learning as an Enabler for Autonomous Blast Furnace (Room Virtual)

28 Jun 21
12:00 PM - 12:30 PM

Pomini Tenova Data Monitoring System - A 4.0 Industry Application Tailor-Made for Roll Grinding Machines (Room Virtual)

28 Jun 21
12:00 PM - 12:30 PM

Development of Electrical Discharge Coating for Extended Textured Roll Campaigns (Room Virtual)

28 Jun 21
12:30 PM - 1:00 PM

Maintenance Becomes Smart: The Power of Digitizing Valuable Knowledge (Room Virtual)

28 Jun 21
12:30 PM - 1:00 PM

Basic Actions to Prevent Continuous Casting Defects of Billets (Room Virtual)

28 Jun 21
3:00 PM - 3:30 PM

Inclusion Shape Control Through Ca Treatment (Room Virtual)

28 Jun 21
3:30 PM - 4:00 PM

Study on Production Technology of Clean Steel in Phase II of Shougang Jingtang United Iron and Steel Co. (Room Virtual)

28 Jun 21
4:00 PM - 4:30 PM

Influence of Mold Powder Slag Composition on Formation of Oxide Particles in Steel (Room Virtual)

28 Jun 21
4:30 PM - 5:00 PM

Why Both Hydrogen and Carbon are Key for Net Zero Steelmaking (Room 202)

29 Jun 21
7:30 AM - 8:30 AM

Reimagining the Future (Room 202)

29 Jun 21
8:30 AM - 9:30 AM

Achieving Successful Laser Velocimeter Measurements for Unguided Products Using New Innovative Technology for Tension Control of Wire Rod in Hot Rolling (Room 207 C)

29 Jun 21
9:30 AM - 10:00 AM

Briquetting and Sintering - Competition or Synergy? (Room 201 A)

29 Jun 21
9:30 AM - 10:00 AM

CANCELLED: A Thermomechanical-Microstructural Model of a Hot Strip Mill (Room 207 D)

29 Jun 21
9:30 AM - 10:00 AM

Case Study: System Modifications Enhance Overall Ventilation Systems (Room 207 A)

29 Jun 21
9:30 AM - 10:00 AM

CokeXpert Cloud: More Focus on Battery Lifetime and Personal Safety (Room 209 B)

29 Jun 21
9:30 AM - 10:00 AM

Corrosion Behavior of Tundish Refractories by Molten Steel and Tundish Flux (Room 205 B)

29 Jun 21
9:30 AM - 10:00 AM

Crane Rail Deformation Mapping Using Laser Scanner Point Cloud (Room 209 C)

29 Jun 21
9:30 AM - 10:00 AM

Design and Application of an Optimum Roughing Mill Backup Roll Contour in a Hot Strip Mill (Room Virtual)

29 Jun 21
9:30 AM - 10:00 AM

Dynamic EAF Energy and Material Balance Model for On-Line Process Optimization (Room 204)

29 Jun 21
9:30 AM - 10:00 AM

Gearboxes’ Service Life Increases Tenfold With Conventional Recirculating Oil System Upgrade (Room 205 C)

29 Jun 21
9:30 AM - 10:00 AM

High-Throughput Casting Technology – Challenges and Solutions (Room 208 A)

29 Jun 21
9:30 AM - 10:00 AM

Investigation of Carbon Deposition During Natural Gas and Oxygen Injection for the Direct Reduction Ironmaking Process (Room 201 B)

29 Jun 21
9:30 AM - 10:00 AM

New High-Performance X-Ray Coating Weight Gauge for Metals (Room 207 B)

29 Jun 21
9:30 AM - 10:00 AM

Novel Method for Stirring BOF Melts in Conjunction With Slag Splashing (Room 205 A)

29 Jun 21
9:30 AM - 10:00 AM

Process and Physical Metallurgical Developments for High-Performance Niobium-Containing Pressure Vessel Steel Plates (Room 208 B)

29 Jun 21
9:30 AM - 10:00 AM

The Advantages of Wireless Condition Monitoring Over Route‐Based Monitoring for Developing a Successful Predictive Maintenance Strategy (Room 209 A)

29 Jun 21
9:30 AM - 10:00 AM

Using Mathematical Modeling to Develop the Indexes Indicating Dependency of Arc Stability in the EAF on Charge Material Quality and Electrode Regulation Effectiveness (Room Virtual)

29 Jun 21
9:30 AM - 10:00 AM

A Fiber-Optic-Distributed Temperature Mapping Technique to Characterize Shell Solidification in Peritectic-Grade Steels (Room 208 A)

29 Jun 21
10:00 AM - 10:30 AM

Addition of Scrap and DRI/HBI to the Blast Furnace — Technology to Overcome Top Temperature Limits and Reduce Greenhouse Gas Emissions (Room 201 A)

29 Jun 21
10:00 AM - 10:30 AM

Comprehensive Process Optimization for Electric Steelmaking Route (Room Virtual)

29 Jun 21
10:00 AM - 10:30 AM

Development of ASTM A709-50WF Heavy Plate for Fracture Critical Bridge Applications (Room 208 B)

29 Jun 21
10:00 AM - 10:30 AM

Evolution from EnviBATTM Pressure Regulation System to EnviBAT TM 2.0 (Room 209 B)

29 Jun 21
10:00 AM - 10:30 AM

Getting Value From Your Operations and Maintenance Data – A Lesson From the Mining Industry (Room 205 C)

29 Jun 21
10:00 AM - 10:30 AM

Heat Transfer Modeling and Adjustment From Radar Measurements in Reheating Steel Furnaces (Room Virtual)

29 Jun 21
10:00 AM - 10:30 AM

Implementation of the Tiltable Sidewall Burner at Nucor Steel Tuscaloosa Inc.: Dynamically Adjustable Burner Angle to Optimize Scrap Melting and Reduce Refractory Wear (Room 204)

29 Jun 21
10:00 AM - 10:30 AM

Innovative Surface Inspection System Deployment (Room 209 A)

29 Jun 21
10:00 AM - 10:30 AM

Inspection of Hot-Rolled Heavy Plate by 3D Inspection (Room 207 D)

29 Jun 21
10:00 AM - 10:30 AM

Installation of Vaicon Slag Stopper at U. S. Steel - Great Lakes Works (Room 205 A)

29 Jun 21
10:00 AM - 10:30 AM

Material Flow How Concept for Wire Rod Coils (Room 207 C)

29 Jun 21
10:00 AM - 10:30 AM

Modern Blast Furnace Top Gas Cleaning: Wet Separation Improvements at U. S. Steel – Great Lakes Works B2 Blast Furnace (Room 207 A)

29 Jun 21
10:00 AM - 10:30 AM

Physical Modeling for Product Development and Performance Optimization in Hot Dip Galvanizing Lines (Room 207 B)

29 Jun 21
10:00 AM - 10:30 AM

Successful Conversion of Manual Cranes Into fully Automatic Cranes (Room 209 C)

29 Jun 21
10:00 AM - 10:30 AM

The Future of Steel Ladle Refractory Monitoring (Room 205 B)

29 Jun 21
10:00 AM - 10:30 AM

The Impact of Data Analytics on Operations at MIDREX® Plants (Room 201 B)

29 Jun 21
10:00 AM - 10:30 AM

A Machine-Learning Approach for Steel Grade Detection in Hot Rolling Mills (Room Virtual)

29 Jun 21
10:30 AM - 11:00 AM

Application of JetBurner Technology for a Small-Sized EAF (Room 204)

29 Jun 21
10:30 AM - 11:00 AM

Cold-Bonded Briquette Testing Methodology and Standards Used for Traditional Furnace Feedstocks (Room 201 A)

29 Jun 21
10:30 AM - 11:00 AM

Crane Girder Deformation Mapping Using Image Processing and Template Matching of Laser Scanner Point Cloud (Room 205 C)

29 Jun 21
10:30 AM - 11:00 AM

Discovery of New Magnesia Source Extends Performance of Ladles in LMF and Vacuum Tank Degassing (Room 205 B)

29 Jun 21
10:30 AM - 11:00 AM

Dolime-Based EAF Hot Repair Material - Successful Product Improvements (Room Virtual)

29 Jun 21
10:30 AM - 11:00 AM

Effect of Through-Thickness Microstructural Homogeneity on Fatigue Performance of Structural Steels in Air and Hydrogen Environments (Room 208 B)

29 Jun 21
10:30 AM - 11:00 AM

Environment Defines Productivity: Emission Control System Modifications Using Fluid Dynamic Study of Building Ventilation at Sinobras Meltshop, Brazil (Room 207 A)

29 Jun 21
10:30 AM - 11:00 AM

Finishing End Areas and Technologies (Room 207 C)

29 Jun 21
10:30 AM - 11:00 AM

HD mold 2021 – Update (Room 208 A)

29 Jun 21
10:30 AM - 11:00 AM

Ladle Hot Spot Detection — A Novel and Robust Approach to Eliminate False Positives in Infrared Thermal Image Analysis (Room 205 A)

29 Jun 21
10:30 AM - 11:00 AM

Revolutionary Endless Strip Production up to 20 mm – Precise and Uniform HSLA Steel (Room 207 D)

29 Jun 21
10:30 AM - 11:00 AM

Rising and Failure of Gas-Based Direct Reduction Processes (Room 201 B)

29 Jun 21
10:30 AM - 11:00 AM

Robotic Workstation for Safe Ladle Sliding Gate Maintenance (Room 209 A)

29 Jun 21
10:30 AM - 11:00 AM

Side Pull Detection Techniques for Wire Rope Hoists (Room 209 C)

29 Jun 21
10:30 AM - 11:00 AM

AI-Based Models of Emissions at the Stack From Industrial Furnaces (Room 207 A)

29 Jun 21
11:00 AM - 11:30 AM

Digital Technologies for Continuous Casting (Room 208 A)

29 Jun 21
11:00 AM - 11:30 AM

Key Challenges for Efficient Descaling (Room Virtual)

29 Jun 21
11:00 AM - 11:30 AM

Optimization of Electrode Consumption in EAF for Different Operating Conditions (Room Virtual)

29 Jun 21
11:00 AM - 11:30 AM

Optimizing Material Handling (Room 209 C)

29 Jun 21
11:00 AM - 11:30 AM

Power Cooling – Advanced Strip Cooling Technology for Hot Strip Mills for Maximum Metallurgical Flexibility, High Cooling Rates and for Saving of Alloying Elements (Room 207 D)

29 Jun 21
11:00 AM - 11:30 AM

The Development of a Modern BF Hearth Sidewall Observation Management (Room 205 B)

29 Jun 21
11:00 AM - 11:30 AM

Yield Stress in Ferritic Steels Influenced by Grain Boundary Walls (Room 208 B)

29 Jun 21
11:00 AM - 11:30 AM

Better Control and Improved Accuracy of the Hot Rolling Process by Modern Encoder Solutions (Room Virtual)

29 Jun 21
11:30 AM - 12:00 PM

Design and Evaluation of a Lab Size Vacuum Sampling Method for Simulating the Twin-Roll Strip Casting Process (Room 208 A)

29 Jun 21
11:30 AM - 12:00 PM

Effects of Steel Chemistry and Reheating Temperature on Prior Austenite Grain Size (Room 208 B)

29 Jun 21
11:30 AM - 12:00 PM

Ladle Bottom Design for Optimized Steel Flow and Metallic Yield (Room 205 B)

29 Jun 21
11:30 AM - 12:00 PM

Measuring Flatness of Rolled Strips Under Tension in Hot Rolling Mills (Room 207 D)

29 Jun 21
11:30 AM - 12:00 PM

Retractable Roofs: Traveling Crane Technologies in Sports (Room 209 C)

29 Jun 21
11:30 AM - 12:00 PM

Transforming Metal Production by Maximizing Revenue Generation With Operational AI (Room 209 A)

29 Jun 21
11:30 AM - 12:00 PM

Value Creation of Dolime Compared to MgO Alternatives for EAF Application (Room Virtual)

29 Jun 21
11:30 AM - 12:00 PM

100% H2 DRI From Nuclear Process Heat (Room 201 B)

29 Jun 21
2:00 PM - 2:30 PM

Accelerated Upgrade Plan for Static VAR Compensators (Room 202 B)

29 Jun 21
2:00 PM - 2:30 PM

Advanced Cooling Technology to Improve High-Strength Plate-Steckel Mill Steel Production (Room 207 C)

29 Jun 21
2:00 PM - 2:30 PM

Approach to Successful Production of Very-Low-Carbon High-Strength Galvanized Dual-Phase Steels Through a CSP Flex Mill (Room 208 B)

29 Jun 21
2:00 PM - 2:30 PM

Bath Level Management in the Consteel DC Electric Arc Furnace (Room 204)

29 Jun 21
2:00 PM - 2:30 PM

Descaling of Medium C and High Si, Mn Steels (Room 207 D)

29 Jun 21
2:00 PM - 2:30 PM

Fine-Scale Details Within the Roll Clusters of 20-High/Sendzimir Mills, Part 1: Microstatic Interactions (Room 207 B)

29 Jun 21
2:00 PM - 2:30 PM

How U.S. Steelmaking Became a Green Industry and What Lies Ahead (Room 207 A)

29 Jun 21
2:00 PM - 2:30 PM

Improvement of Centerline Segregation at United States Steel Corporation’s Gary Works No. 2 C Line Continuous Caster (Room 205 B)

29 Jun 21
2:00 PM - 2:30 PM

Managing the Impact, Assessment and Application of Solutions for Combustible Dust Mitigation and Control in Modern Manufacturing Environments (Room 209 B)

29 Jun 21
2:00 PM - 2:30 PM